Training Course Syllabus:
Basic Principles of Construction Insurance
Audio Conference
Benefits
Learn how to secure appropriate insurance
coverage at a construction project's inception to help protect you if claims
arise.
This topic will offer an overview of basic insurance coverage used for
construction projects. The presenters will discuss how to secure appropriate
insurance coverage at a project's inception and what to do when claims arise
during construction or after project completion. Builder's risk, CGL and other
common project policies will be discussed. Prior attendees have described this
as among the best presentations they've participated in, extremely informative
and useful, and have described the presenters as knowledgeable and possessing
in-depth understanding of the subject matter and an ability to convey it
clearly.
Learning Objectives
- You will be able to discuss builders risk
insurance.
- You will be able to explain general liability
insurance.
- You will be able to identify what are typical
exclusions and endorsements in builder risk and general liability insurance.
- You will be able to define appropriate
insurance coverage at projects inception
Agenda
Builders Risk Insurance
- What Does It Cover?
- What Are Typical Exclusions and Endorsements?
General Liability Insurance
- What Does It Cover?
- What Are Typical Exclusions and Endorsements?
Faculty
Representative, Pillsbury Winthrop Shaw Pittman LLP
- Trial lawyer in the Construction and Insurance
Groups at Pillsbury Winthrop Shaw Pittman LLP in Washington, D.C.
- Member of Pillsbury Winthrop Shaw Pittman
LLP’s Construction and Insurance Recovery Groups, with a primary focus on
insurance recovery disputes involving construction firms, developers and other
entities
- Resolved numerous insurance claims on behalf
of policyholders through formal litigation, alternative dispute resolution,
and informal negotiations
- Experience includes claims involving builders
risk, commercial general liability, professional liability, pollution
liability, directors and officers liability, employment practices liability
and other policies
Continuing Education Units
- AIA
- CC
- CLE
- CPE
- ENG
- Additional credit may be available upon
request.
Detailed Credit Information
Only registered attendee will receive continuing education credit. Additional
attendees can receive continuing education credits at a discounted price.
AIA 1.5
Lorman Business Center, Inc. is registered with the AIA Continuing Education
System (AIA/CES). This 1.5 hour program offers 1.5 Learning Unit hours, which
will be reported directly to the AIA/CES for AIA members.
CC 0.5
This course has been reviewed and approved for inclusion in the Construction
Compliance Certification Program and qualifies for 0.5 credit.
AL CLE 1.5 (Pending)
AR CLE 1.5
This course has been approved for 1.5 hours of CLE by the Arkansas CLE Board.
AZ CLE 1.5
The State Bar of Arizona does not approve or accredit CLE activities for the
Mandatory Continuing Legal Education requirement. This activity may qualify for
up to 1.5 hours toward your annual CLE requirement for the State Bar of Arizona.
CA CLE 1.5
Lorman Business Center, Inc. is a State Bar of California approved MCLE sponsor
and this course qualifies for 1.5 CLE hours.
CO CLE 2.0
This program has been approved by the Colorado Supreme Court Board of Continuing
Legal and Judicial Education for 2.0 hours of CLE.
GA CLE 1.5
This program has been approved by the Georgia Commission on Continuing Lawyer
Competency for 1.5 CLE hours.
HI CLE 1.5
This program was approved by the Hawaii State Board of Continuing Legal
Education for 1.5 VCLE credit hours.
IL CLE 1.5
This course was approved for a total of 1.5 hours of MCLE Credit by the Illinois
MCLE Board.
ME CLE 1.5
This course has been approved by the State of Maine Board of Overseers of the
Bar. Lawyers who complete this course shall receive 1.5 hours of CLE credit
under M. Bar R. 12.
MO CLE 1.8 (Pending)
MS CLE 1.5 (Pending)
This program has been submitted to the Mississippi Commission on Continuing
Legal Education. Approval pending.
MT CLE 1.5
This program has been approved by the Montana Commission of Continuing Legal
Education for a total of 1.5 CLE credits.
NC CLE 1.5 (Pending)
NJ CLE 1.8 including Civil Trial Law 1.8; General 1.8
This program has been approved by the Board on Continuing Legal Education of the
Supreme Court of New Jersey for 1.8 hours of total CLE credit. This course is
eligible for certification credits in the area of Civil Trial Law for 1.8 hours
and General for 1.8 hours.
NV CLE 1.5
This program has been approved by the Nevada Board of Continuing Legal Education
for 1.5 CLE hours.
NY CLE 1.5 including Areas of Professional Practice 1.5
This course has been approved in accordance with the requirements of the New
York Continuing Legal Education Board for up to a maximum of 1.5 credit hours,
of which 1.50 credit hours may be applied toward the Areas of Professional
Practice requirement. Each hour may be counted only as satisfying one category
of credit; duplicate credit for the same hour of instruction is not permitted.
Lorman Business Center, Inc. has a financial hardship guideline.
PA CLE 1.5
This program has been approved by the Pennsylvania Continuing Legal Education
Board for 1.5 hours of substantive law, practice and procedure CLE credit.
RI CLE 1.5
This program has been approved by the Rhode Island Mandatory Continuing Legal
Education Commission for 1.5 hours of CLE credit.
TN CLE 1.5
This program has been approved by the Tennessee Commission on Continuing Legal
Education and Specialization for a maximum of 1.5 hours of credit.
UT CLE 1.5 (Pending)
This program has been submitted to the Utah State Board of Continuing Legal
Education. Approval Pending.
VA CLE 1.5 (Pending)
This program has been submitted to the Virginia Mandatory Continuing Legal
Education Board for 1.5 CLE credit hours.
VT CLE 1.5
This program has been approved by the Mandatory Continuing Legal Education Board
of Vermont for 1.5 hours of CLE credit.
WA CLE 1.5
This program has been approved by the Washington State Board of Continuing Legal
Education for 1.5 hours of credit.
WI CLE 1.5
This program has been approved by the Board of Bar Examiners for 1.5 hours for
use toward the Wisconsin Mandatory CLE requirement.
WV CLE 1.8
This program has been approved by the West Virginia State Bar MCLE Commission
for 1.8 MCLE hours.
AK ENG 1.5
This program may qualify for 1.5 professional development hours with the Alaska
State Board of Registration for Architects, Engineers and Land Surveyors.
AL ENG 1.5
The Alabama Board for Continuing Education for Professional Engineers and Land
Surveyors does not pre-approve courses for professional development credit. This
program may qualify for a maximum of 1.5 hours toward the annual PDH
requirement.
FL ENG 1.0
This course has been approved for 1.0 PDHs by the Florida Board of Professional
Engineers in the Areas of Practice.
GA ENG
This course may qualify for continuing education credit for engineers through
the Georgia State Board of Registration for Professional Engineers.
IA ENG
This course may qualify toward personal development hours for engineers. Please
refer to Chapter 3, 193C IAC.
ID ENG 1.5
This course may qualify for 1.5 professional development hours through the Idaho
Board of Professional Engineers and Professional Land Surveyors.
IL ENG 1.5 (Pending)
This course has been submitted to the Illinois Society of Professional Engineers
for 1.5 professional development hours.
IN ENG 1.8
This course may qualify for 1.8 PDH's through the Indiana State Board for
Professional Engineers.
KS ENG 1.0
This course may qualify for 1.0 professional development hours for engineers.
LA ENG
Lorman Business Center, Inc. is a board approved sponsor with the Louisiana
Professional Engineering and Land Surveying Board. This course is approved to
offer continuing education credit for engineers.
ME ENG 1.5
The State of Maine Professional Engineers Registration Board does not
pre-approve courses for professional development credit. This program may
qualify for a maximum of 1.5 hours toward the annual PDH requirement.
MN ENG 1.0
This course may qualify for a maximum of 1.0 hours toward the PDH requirement
for engineers. The Minnesota State Board of Registration for Engineers has final
authority on the acceptance of individual courses.
MO ENG 1.5
This course may qualify for 1.5 PDH's through the Missouri Board for
Professional Engineers.
MS ENG
This course may qualify for professional development hours for engineers.
ND ENG 1.5
Lorman Education Services is an approved provider through the North Dakota State
Board of Registration for Engineers and Land Surveyors. This seminar qualifies
for 1.5 of continuing professional competence for engineers.
NE ENG
This course may count toward engineers continuing education hours if this course
is continuing engineering education for you.
NH ENG 1.5
This course may be used for continuing education through the New Hampshire Board
of Engineers for 1.5 PDH's.
NJ ENG
This course may qualify for continuing education credit for engineers by the New
Jersey Professional Board of Engineers and Land Surveyors.
NM ENG 1.5
May qualify for up to 1.5 PDHs for engineers.
NV ENG 1.5
This course may qualify for 1.5 PDH's toward the professional development
requirement for engineers in Nevada.
OH ENG
This course may qualify for continuing education credit for engineers through
the Ohio State Board of Licensure for Professional Engineers provided it is a
relevant managerial, ethical or technical topic relevant to the practice of
engineering or surveying.
OK ENG
This course may count toward engineers continuing education hours.
OR ENG
This course may count toward engineers continuing education hours in Oregon,
please refer to your rules and laws.
PA ENG 1.8
This program may qualify for 1.8 PDHs for engineers through the Pennsylvania
State Board of Professional Engineers, Land Surveyors and Geologists.
SC ENG 1.5
This course may qualify for 1.5 hours toward the PDH requirement for engineers
through the South Carolina Board of Registration for Professional Engineers.
SD ENG
May be eligible for continuing education by the South Dakota Board of Engineers.
TN ENG
This course may count toward engineers continuing education hours.
TX ENG 1.5
This seminar may qualify for 1.5 hours of continuing education for engineers.
UT ENG
This course may qualify for continuing education credit for engineers.
VA ENG 1.5
This program may qualify for 1.5 hours of continuing education through the Board
for Architects, Professional Engineers, Land Surveyors, Certified Interior
Designers and Landscape Architects (APELSCIDLA BOARD).
WV ENG 1.5
This seminar may qualify for 1.5 professional development hours for engineers.
CPE 1.5 including Management Advisory Services 1.5
Lorman Education Services is registered with the National Association of State
Boards of Accountancy (NASBA) as a sponsor of continuing professional education
on the National Registry of CPE Sponsors. State boards of accountancy have final
authority on the acceptance of individual courses for CPE credit. Complaints
regarding registered sponsors may be addressed to the National Registry of CPE
Sponsors, 150 Fourth Avenue North, Suite 700, Nashville, TN 37219-2417. CPE
Credit: Maximum Credit Hours: 1.5 each session (based on a 50 minute credit
hour). Field of Study: Management Advisory Services. Prerequisite: basic
knowledge of construction law. Level of Knowledge: Intermediate. Teaching
Method: Seminar/Lecture. Advance Preparation: None. Delivery Method: Group-Live.
Please refer to the information in this brochure for outline, course content and
objectives. Upon completion of this course, you will receive a certificate of
attendance. Final approval of a course for CPE credit belongs with each state's
regulatory board.
Lorman Business Center, Inc. is a registered provider for CPA CPE through the
State Education Department of New York, Sponsor number: 000640. The following
course will carry the subject area of Advisory Services for 1.5 hours.
Lorman Business Center, Inc. has registered with the Texas State Board of Public
Accountancy as a CPE Sponsor. This registration does not constitute an
endorsement by the Board as to the quality of our CPE Program. This program
qualifies for 1.5 hours of continuing professional education.
The CLE Code is ONLY a requirement when applying for CLE Credit in New York or
New Jersey or Kansas. Other states do not need to supply the CLE Code to apply
for CLE credit.
Who Should Attend
This live audio conference is designed for attorneys, presidents, vice
presidents, contractors, subcontractors, engineers, architects, construction and
project managers, developers, accountants, controllers, risk managers and other
construction professionals.
Conference Hours:
Time: 1:00 pm ET (12:00 pm CT, 11:00 am MT, 10:00
am PT)
Length: 1 hour 30 minutes |
Lorman Education Seminars